200Amp AC 3 Phase 50Hz Open Diesel Generator, Emergency Backup Generator
Genset rated power
110KW / 138KVA
3 phase 4 wire
Closed cycle water-cooled with fan, water tank
Overall dimension (L×W×H) mm
Gross weight (kg)
CUMMINS (Optional )
4 cylinders in Line,4 stroke, direct injection
Turbocharged and air-to-air aftercooled
Engine cooling system
Speed governing system
Electronic speed governor
By 24V batteries
Engine filter system
Dry type air filter ,fuel filter, oil filter, water filter
100% Load fuel consumption (l/h)
STAMFORD (Optional )
Brushless self-excited AVR regulation
3 phase 4 pole
Steady frequency change
No load voltage
Control, monitor and protect the Generator Set including:
High water temperature
Low oil pressure
Over and under speed
Under/Over generator voltage
Start and stop failure
Low and high battery voltage
INSPECTION AND TEST
1.1 Each engine shall be tested at manufacturer’s workshop to certify the engine output and fuel consumption in accordance with the site operating condition specified by purchaser on the specification datasheet.
1.2 All relevant information drawings pertinent to the testing and test procedure shall be transmitted to the purchaser in advance of the test date notification.
1.3 The purchaser shall call for additional testing if test results are unsatisfactory or marginal. Any equipment rejected shall be repaired or replaced to the purchaser’s satisfaction and tests shall be repeated.
1.4 Any unsatisfactory material, equipment, installation, or workmanship shall be replaced or repaired to the purchasers satisfaction at the manufacturers cost.
1.5 The engine and generator shall be tested individually in accordance with relevant standards specified above.
1.6 The completed and individually tested engine and generator shall be assembled onto the base plate with all auxiliaries, instruments and controls for a complete test of the generator set.